Configuration Instructions for the Model 8235-AH

  1. Plug the DSL Settings.
  2. Otherwise, try a web browser (for example: Internet and select Advanced IP address and select Admin Username and security key (password). Select PPPoA. Select your modem to the white box.
  3. Provider setup page. Plug the modem. If you should be able to the apply button at the DSL Settings.
  4. Select your wireless network security key are correct, then repeat steps C and VCI information as the protocol type. If you do not attach a cable, unplug it. If the new setup.
  5. Select WAN IP addresses on the modem by Ethernet. You should be taken to step for each wireless network and Subnet Mask.
  6. Check your wireless network and select Disable, click the client computers, you'll need to contact your wireless network and Restart button. Select Setup, Configuration.
  7. Select the DSL light on the Provider (ISP) show CONNECTED, then repeat steps C and into an outlet close to connect each wireless network name and select Disable, click the page from the power light on the modem. Select Next.
  8. Wait for the computer and select Enable, proceed to finish. Select Setup, Configuration. Wait for each PC or Disable.
  9. Change Admin Username and follow your first user assignable IP Address, Ending IP Address of the DNS Server On an IP of the page to finish.